ANSINSPIResidential Inground Swimming Pools-This standard is a revision of ANSI/NSPI-5 , Standard for Residential Inground Swimming. Standards such as ANSI/AHAM RAC, Room Air For homes with inground pools, ANSI/NSPI , Residential Inground Swimming. For the design, equipment, and installation of residential inground swimming pools. This standard is referenced in the International Codes. PURCHASE .
|Published (Last):||23 May 2017|
|PDF File Size:||4.69 Mb|
|ePub File Size:||11.55 Mb|
|Price:||Free* [*Free Regsitration Required]|
Solar pool heating systems shall be permitted to run anwi higher speeds during periods of usable solar heat gain. The answers to the above stated questions were given with the understanding that the said questions are to be considered individually and not collectively. An approved gravity drainage system. Underwater lighting fixtures shall be approved for the service.
Pressure filters shall be equipped with readily accessible air relief valves, loss of head or pressure gauges on the inlet and outlet pipes, and an access head or hole large enough to permit inspection, maintenance and repair work.
All pool drain outlets shall znsi equipped with gratings having an area of openings not less than four 4 times the cross sectional area of the outlet pipe. The petition is filed pursuant to, and must conform to the requirements of Rule Section AG – Barrier Requirements: Where provided, vacuum or pressure cleaner fitting s shall be located in an accessible position s at least six inches 6″ and not greater than twelve inches 12″ below the minimum operational water level or as an attachment to the skimmer s.
The Petitioner is in the process of designing a 10, gallon residential swimming pool with a therapy spa in Bradenton, Florida, in accordance with the Florida Building Code. This standard is not included in any packages. Gates other than pedestrian access gates shall have a self-latching device.
Maximum system flow is not defined in this standard; the flow requirement is that the equipment shall be sized to provide a turnover of the pool water at least once every twelve 12 hours. Pools shall be operated with due consideration anssi the comfort and well being of adjoining property owners.
Wnsi and lint catchers shall be so designed that they can be easily dismantled for cleaning and inspection and shall be so located as to be easily accessible for cleaning.
See definition of Private Swimming Pool. The system’s supply of recirculated water and makeup water to the pool shall be constructed in conformance with all the applicable provisions of this code. If the document is revised or amended, you will be notified by email. The filter backwashing facilities shall be sufficient to backwash at a rate of twelve 12 gallons per minute napi square foot of filter area. This standard does not address return side velocities. No portion of an outdoor swimming pool, including appurtenant equipment, enclosing barrier and other structures as required by this chapter, shall be located less than twenty five feet 25′ from any property line, or less than one hundred feet ‘ from any residence, existing at the time of construction of the pool, on any other property.
A “swimming pool” includes all appurtenant equipment, such as, but not limited to, pumps, filters and disinfectant equipment.
See figure in section of this chapter. All walls surrounding an indoor swimming pool shall comply with section AG The flow and velocity requirements in this standard are intended to insure adequate water flow 203 sanitation, filtration, filter backwashing, etc. Any private swimming pool that is not an indoor pool. Where there are decorative cutouts within vertical members, spacing within the cutouts shall not exceed 1. Lighting shall be directed so as not to constitute a nuisance or annoyance to other property owners.
The energy requirements for residential pools and inground spas shall be as specified in Sections The Petitioner asks three questions regarding this project: Minimum water depths and distances for diving hoppers for pools, based on board height above water, shall comply with table A for public pools and table B for private pools in section of this chapter.
ANSI/APSP Standards & Specifications, ANSI Standards List | APSP
This definition includes inground, aboveground and onground swimming pools, hot tubs and spas. Standards Subsctiption may be the perfect solution. Barriers shall be located so as to prohibit permanent structures, equipment or similar objects from being used to climb the barriers. No portion of any swimming pool shall be located within twenty five feet 25′ from any septic tank or any septic field.
For the purposes of this code, pools are classified as private swimming pools or public swimming pools as defined in section of this chapter.
Single outlet systems, such as automatic vacuum cleaner systems, or other such multiple suction outlets whether isolated by valves or otherwise shall be protected against user entrapment. Solid barriers which do not have openings, such as a masonry or stone wall, shall not contain indentations or anssi except for normal construction tolerances and tooled masonry joints.
In swimming pools thirty feet 30′ in width or less, water circulation system outlets shall be located so as to provide at least one outlet at the deepest point in the pool. The Petitioner is seeking clarification of the nsi and velocity requirements for swimming pool piping contained in three standards referenced in the Florida Building Code: Spacing between vertical members shall not exceed 1.
ANSI/APSP Standards & Specifications List
Access gates shall comply with the requirements of section AG Pedestrian access gates shall open absi away from the pool and shall be self-closing and have a self-latching device. A fence, a wall, a building wall, the wall of an aboveground swimming pool, or a combination thereof, which completely surrounds the swimming pool and obstructs access to the swimming pool.
No swimming pool shall extend two feet six inches 2’6″ or more aboveground.
The default circulation speed shall be the residential filtration speed, with a higher speed override capability for a temporary period not to exceed one normal cycle or 24 hours, whichever is less. The swimming pool and equipment shall be equipped to be emptied completely of water and the discharged water shall be disposed of in an approved manner that will not create a nuisance.
ANSI/NSPI-5 2003 Standard for Residential Inground Swimming Pools (PDF Download)
The energy requirements for portable spas shall be in accordance with Section A minimum of one recirculation system inlet shall be provided for every six hundred fifteen square feet of surface area of the pool.
For the purpose of this section, the front line of any residence shall be a line drawn parallel to any road abutting the lot which intersects the point of the residence located closest to that road. Association of pool and spa professionals [APSP]. If the makeup water supply line discharges to a surge or balancing tank, the point of discharge shall be at least six inches 6″ above the rim of the tank.
We have no amendments or corrections for this standard. This standard is also available to be included in Standards Subscriptions.
Appendix G of the international one- and two-family dwelling code,is hereby adopted as part of this chapter in the following amended and restated form and shall read as follows to the extent that said amended appendix G is inconsistent with the other provisions of this chapter, the more restrictive provisions shall govern and prevail: Swimming pools shall be designed to withstand the water pressure from within and to resist the pressure of the earth when the pool is empty and a certificate of an architect licensed by the state or of a structural engineer licensed by the state, shall be required as 0203 of such design characteristics.